Phug Bass OS by OscillatorSynk
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is set to 76% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.
LFO 2 direct modulation amount for pulse width of square oscillator is 133.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 177.
Tone for oscillator 2 is set to 50 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 2 modulation amount for tone for oscillator 2 is 64.
Volume (VCA) volume
Amplification level is set to 1.76dB (195) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Oscillators ranges timbre
Oscillators 1 range is 4'.
Oscillators 2 range is 8'.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 4 modulation amount for high-pass filter cut-off frequency is 51.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 252.96Hz (69) and is modulated by Mod Wheel, Note Vel, VCF Env.
Mod Wheel mod-matrix 3 modulation amount for low-pass filter cut-off frequency is -11.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 153.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 255.
Note Num direct modulation amount for low-pass filter envelope amount is 98.
Filter resonance is statically set to 5% (12).
Oscillator drift & unison detuning timbre
Unison detune level is set to ±11 cents (56) and is modulated by Note Num.
Note Num mod-matrix 1 modulation amount for unison detune level is 86.
Oscillators drift level is manually set to 19. Drift rate is 0
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Oscillator 1 pitch pitch
Oscillator 1 pitch is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 1 pitch is 5.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
Mod Wheel modulator
Controls OSC 2 Tone Modulation Depth, VCF Cut-off Frequency, HPF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 2 Tone Modulation Depth | 64 |
| timbre | matrix | VCF Cut-off Frequency | -11 |
| timbre | matrix | HPF Cut-off Frequency | 51 |
Note Num modulator
Controls VCF Keyboard Tracking, Unison Detune.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 98 |
| timbre | matrix | Unison Detune | 86 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 153 |
| menu | VCF Envelope Velocity Sensitivity | 255 |
LFO 1 modulator
Controls OSC 1 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 1 Pitch | 5 |
| name | value |
|---|---|
| LFO 1 Rate | 0.78Hz (102) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 133 |
| name | value |
|---|---|
| LFO 2 Rate | 0.25Hz (62) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.66s (96) |
| VCA Envelope Sustain Level | 14% (37) |
| VCA Envelope Release Time | 0.35s (59) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 153 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.32s (54) |
| VCF Envelope Sustain Level | 16% (42) |
| VCF Envelope Release Time | 0.33s (56) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 117 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 132 |